Loading ...
Loading ...
Loading ...
Automatic Ice and Water Dispenser
Using The Dispenser
Your automatic ice & water dispenser includes a control panel a drinking glass bay, and two
push-paddles for turning on the tce and water supplies.
Using the dispenser control panel is necessary for the ice dispenser but not the water
dispenser. The control panel also includes opttons for lighting, filter monitoring, and
increasing the rates of ice making and freezing.
J
J
J
0 OOOG
Cube_ Crushed U_t
@ @ @
Filteredlce #ndWdter
ICE WATER
Dispensing Ice
To operate the ice dispenser O, press an option for
crushed or cubed ice on the control panel. Press a
drinking glass against the dispensing paddle (as far
up as possible to catch all the ice). To stop, pull the
glass away from the dispensing paddle. See details
for operating the dispenser controls below.
Dispensing Water
To operate the water dispenser O, press a drinking
glass against the dispensing paddle. To stop
dispensing water, pull the glass away from the
dispensing paddle. The dispensed water is not cold.
For colder water, first add crushed ice or cubes to
your drinking glass.
A drip tray located at the base
removable for easy cleaning.
OCube
OCrush
_)Light
OFilter Reset
(& Status Light)
Drip Tray
of the dispenser bay catches small spills and allows them to evaporate.This drip tray is
Press touchpad to get cubed ice. Light displays green. Press glass against ice
dispensing paddle, holding high up to catch all ice.
Press touchpad to get crushed ice. Light displays green. Press glass against ice
dispensing paddle, holding high up to catch all ice.
Press touchpad to turn on dispenser light. Light displays green. Press touchpad again to
turn off dispenser light. Dispenser light also turns on automatically when ice and/or water
is dispensed.
Light displays in one of three possible colors each time the dispenser is used to show
status of water filter:
Green Water filter does not need changing.
Amber Water filter is about 80 percent used. Please order a new one.
Red Water filter is 100 percent used. Please change as soon as possible.
After replacing the water filter, reset the filter status by pressing and holding touchpad for
10-15 seconds.
_Lock The dispenser can be locked to prevent unwanted use. To lock, press and hold touchpad
for 3-5 seconds. Light displays red. To unlock, press and hold touchpad for 3-5 seconds
until light goes out.
13
Loading ...
Loading ...
Loading ...