Loading ...
Loading ...
Loading ...
Daily Weekly Monthly Yearly
Clean External cleaning Spark plug
Cold air intake Fuel tank
Function inspection
General inspection Vibration damping system* Fuel system
Fuel leaks Muffler* Air filter
Water delivery system Drive belt Clutch
Throttle lockout* Carburetor
Stop switch* Starter housing
Blade guard and SmartGuard*
Cutting blade**
Replace Fuel filter
* Refer to
Safety devices on the product on page 8
.
** Refer to
Cutting blades on page 11
.
To clean externally
• Flush the product externally with clean water after
each day of operation. If it is necessary, use a brush.
To clean the air intake
CAUTION: A dirty or blocked air intake
makes the product too hot. This can cause
damage to the piston and cylinder.
• Clean the air intake if it is necessary.
• Remove blockage, dirt and dust with a brush.
To do a check of the spark plug
CAUTION: Always use the
recommended spark plug type. Use of the
incorrect spark plug can cause damage to
the piston and cylinder. For recommended
spark plug refer to
Technical data on page
34
.
Examine the spark plug if the product is low on power,
does not start easily or if it operates unsatisfactorily at
idle speed.
1. Loosen the 3 screws on the air filter cover and
remove the air filter cover.
2. Make sure that the spark plug cap and ignition cable
are not damaged.
WARNING: A damaged spark plug
cap and ignition cable can cause
electrical shock.
26 1447 - 004 - 04.05.2021
Loading ...
Loading ...
Loading ...