Loading ...
Loading ...
Loading ...
Beforeassemblingthe patioheater,usethe parts
list to checkthat all necessarypartshavebeen
included.Inspectpatioheaterfor damageas you
proceed.Donotassembleoroperatethepatioheater
if it appearsdamaged.Ifyouhavequestionsduring
the assembly process, call 1-888-317-7642,
8am- 8pmCST,MondaythroughFriday.
CAUTION:
Removeall partsandhardwarefromshippingbox.
Refertothepartslistandhardwarepackillustrations
andassemblethepatioheaterona protectivework
surfacetoavoidscratchingheatersurfaces.
• Protective gloves
• Eye protection
• One #2 Phillips Head Screwdriver
• One Adjustable Wrench
Attach the Reflector (Parts List Item #1) onto
Emitter Grid (Parts List Item #2) by using 3
of the 1/4" Spring Washers and 1/4" Cap Nuts
provided. See Fig. 1. Use adjustable wrench
to tighten the Nuts.
2. Position the assembled Emitter Grid and
Reflector onto the Burner Assembly. See
Fig. 2. Rotate the Emitter Grid so the vertical
welding line is in the back and the screw
holes line up with the holes on Burner
Assembly. Insert 4 of the M4xl0 mm round
head screws and tighten securely.
3. Position the top assembly (created in figures 1
and 2) on the Base. Be sure to line up the 4
Tabs on Burner Assembly with the 4 openings
on Base. Make sure the Cylinder Access Door
is located in the back and the Control Knob is
located in front. Push the Burner Assembly
downward onto Base until the Tabs snap into
place. See Fig. 3.
Figure 1
REFLECTOR
EMITTER
GRiD
Figure 2
REFLECTOR
EMITTER
GRID
ASSEMBLY
Figure 3
HOLE ON BASE
FORTAB EMITTER
GRID
TAB ON BURNER
ASSEMBLY
BURNER
ASSEMBLY
Loading ...
Loading ...
Loading ...