Loading ...
Loading ...
Loading ...
First Steps
Tools Necessary:
Phillips Head
or
Quadrex Head
Screwdriver
Awl
Top Hinge
Cover
)Top Hinge
NOTE
The direction in which your refrigerator doors open (door swing) can be
reversed, from left to right or right to left, by moving the door hinges from one
side to the other. Reversing the door swing should be performed by a qualified
person.
IMPORTANT
16.
17.
18.
19.
Before you begin, turn the refrigerator temperature control to "0" (OFF) and
remove the electrical power cord from the wall outlet. Remove any food from
door shelves.
\
Hinge
Door Stop // Door
Stop
Hinge
1. Remove toe grille.
2. Remove top hinge cover. Trace around the hinge with a soft lead pencil.
This makes reinstaJJation easier. Remove top hinge and lift door off center
hinge pin. Set door aside.
3. Unscrew center hinge pin using adjustable wrench and save for reassembJy.
Ensure plastic washer stays on hinge pin.
4. Lift refrigerator door off of bottom hinge and set aside.
5. Remove center hinge and shim by removing inside screw and loosening two
outside screws enough to allow hinge and shim to slide out. Tighten screws.
6. Loosen two outside screws on opposite side of refrigerator, remove inside
screw and instal center hinge.
7. Remove two screws on bottom hinge with 3/,, socket wrench.
8. Instal bottom hinge on opposite side with the two screws removed from step 7.
9. Unscrew bottom hinge pin using adjustable wrench. Move hinge pin to other
hole in hinge and tighten with adjustable wrench.
10. Reverse door handles (see instructions on next page).
11. Move freezer and refrigerator door stops to opposite side. Before starting
screws, use an awl to puncture the foam.
12. Position refrigerator door onto bottom hinge pin and screw center hinge pin
through center hinge into top of door. Close refrigerator door to help align
hinge hole.
13. Tighten center hinge pin with adjustable wrench.
14. Remove cabinet and hinge hole plugs and move to opposite side.
15. Lower freezer door onto center hinge pin.
Close freezer door. Have an assistant lift up on opposite side of door while tightening screws to instal top hinge.
Flip toe grille end-to-end and reinstall.
Hug in electrical power cord and turn refrigerator temperature control to center position. Adjust setting as necessary.
Ensure that aii gaskets seal properly and doors are level.
Loading ...
Loading ...
Loading ...