Loading ...
Loading ...
Loading ...
13 — English
TROUBLESHOOTING
IF THESE SOLUTIONS DO NOT SOLVE THE PROBLEM CONTACT YOUR AUTHORIZED SERVICE DEALER.
PROBLEM POSSIBLE CAUSE SOLUTION
Handle not in position. Upper handle not secured to tubes on
snow blower housing.
Make sure upper handle is in proper
position and bolts are tightened securely.
Snow blower not starting. Battery is low in charge.
Batteries not in correct orientation
(minimum of one pair).
Start button is not depressed.
Charge the battery.
Conrm battery orientation.
Press start button and auger paddle.
The motor is on but the auger does
not turn.
The shear pins are damaged or need to
be replaced.
Replace the shear pins. See Replacing
Shear Pins in the Maintenance section.
After passing, the snow blower leaves
a layer of snow on the ground.
The scraper is worn.
Skid shoes may be set too high.
Replace the scraper. See Adjusting/
Replacing the Scraper in the Mainte-
nance section.
Adjust skid shoes lower to decrease the
gap between the scraper and the ground.
MAKE THE MOST OF YOUR PURCHASE!
Go to http://register.ryobitools.com and register your new tool on-line.
Your product has been fully tested prior to shipment
to ensure your complete satisfaction.
For any questions about operating or maintaining
your product, call the RYOBI Help Line!
1-800-525-2579
This product has a Five-year Limited Warranty for personal, family,
or household use (90 days for business or commercial use).
For warranty details, visit www.ryobitools.com
or call (toll free) 1-800-525-2579.
Loading ...
Loading ...
Loading ...