Loading ...
Loading ...
Loading ...
ge.com
Control Settings
Cycles
POTS& PANS/ For heavily soiled dishes or cookware with dried-on or baked-on soils.Everyday dishes may be included.
HEAVYWASH This cycle will not remove burned-on foods.
(onsomemodelsl
NORHAL/ For loads of everyday dishes, glasses and cookware with medium soils. NOTE: Hang dishes have lighter
NORMAL WASH soil than normal. Choosing a cycle other than NORMAL WASHwill save energy and water.
SHORT WASH For quicklg washing loads of everyday dishes with medium soils that have not dried on, such as loads
(onsomemodelsl consisting mostly of glasses.
WATERSAVER For dishes with light soils.
LIGHT WASH
(onsomemodelsl
RINSEONLY For rinsing partial loads that will be washed later. Do not use detergent.
DRYING For warming clean dishes and serving plates. This cycle will take approximately 30 minutes.
PLATEWARMER
HOT PREWASH Preheats wash water to the correct temperature.
HOT START
CHINA CRYSTAL For lightly soiled china and crystal.
(onsomemodels)
Options
Thelight above the selectedpod will beONto indicate which OPTIONhas beenselected.
HI TEMP Turns on the heater inall postrinse and final rinse cycles to help prevent spotting on dishware. This
RINSE option may be turned ON or OFFduring the wash cycle.
onsomemodels)
HI TEMP Energizes the heater to boost water temperature in all prewash and main wash fill cycles. Recommended
WASH for use with heavily soiled dishes. Option may be turned ON or OFFduring the wash cycle.
HEATED DRY Shuts off the drying heat option. Dishes air dry naturally and energy is saved.
OFF
HEATED DRY Turns the heater on for fast drying. This cycle will extend the time to your wash cycle by 30 minutes.
ON NOTE:Cannot be selected with RINSEONLY cycle.
LOCK When the LOCKpad istouched twice within 3seconds,all pads become inoperative. Youcon lockthecontrols to
onsomemodelsl prevent any selectionsfrom beingmade. Oryou con lock the controlsafter you havestarted ocyde or selected
DELAYSTARTso thecycleor DELAYSTARTisnot interrupted.
Children cannot occidentally start dishwasher by touching pods with this option selected.
Tounlock the dishwasher after it has been locked, touch the LOCKpad twice within 3 seconds.The light above
the LOCKpad willturn off.
DELAYHOURS You can delay the start of a wash cycle for up to 8 hours. Press the DELAYHOURS pad to choose the
onsomemodels) number of hours you want to delay the start of the cycle, then pressSTART/RESET.The machine will count
down and start automatically at the correct time. Pressing START/RESETa second time will cancel the
DELAYHOURSselection.
NOTE: If you forget to fully close the door, a reminder signal will beep until you do so.
RESET To change a cgcle after washing starts, touch the START/RESETpad to cancel the cycle. After water is
onsomemodelsl pumped out and the motor stops, you can reprogram and restart the dishwasher. This will take
approximately 90 seconds.
NOTE: On GSD3900 model, the light above the selected pad will be ON to indicate which OPTION has been selected.
@
Start (Models with a Dial)
Slowlgturn the Dialto the STARTor ONposition,orthe selectedcgcle.Don'tturn it pastthe START,ON
or cgcle position,or gou could accidentallgmissa rinse.
There isa time delag between start-up and water fill sogou will not hear ang wash action right awag.
?_Latch the door to beginthe cgcle.
Loading ...
Loading ...
Loading ...