Loading ...
Loading ...
Loading ...
21
PROBLEM POSSIBLE CAUSE/FIXES
The dishwasher
won’t start
The door may not be closed properly.
Make sure that the door is closed and latched.
The power is o or not connected.
Make sure that the power is connected and turned on.
The delay start option is selected.
Refer to the “Delay” section under “Controls and indicators” on page 8
The dishwasher
beeps at the end
of the cycle
This is normal and indicates that the wash cycle is complete.
The rinse aid light
is on
The rinse aid level is low.
Add rinse aid.
The dishwasher
runs too long
The dishwasher is connected to a cold water supply.
Make sure that the dishwasher is connected to a hot water supply.
If not, change the water supply to a hot water source.
The cycle time varies, depending on the soil level of the dishes.
When heavy soil is detected, the wash times will be longer.
Depends on the option selected.
Some options will add time to the cycle.
The dishes are not
clean enough
The water pressure is too low.
Make sure that the water pressure is above 20 psi.
Use your dishwasher when water demand is low.
The inlet water temperature is too low.
Make sure that the dishwasher is connected to a hot water supply. If not,
change the water supply to a hot water source. Use your dishwasher when hot
water demand is low.
Dishes are too close together.
Reload the dishwasher as shown in “Preparing and loading dishes” on page 9
Improper use of detergent.
Add detergent depending on the water hardness and washing cycle you
choose. Use fresh detergent.
The selected cycle is not suitable for the soil level on the dishes.
Choose a different cycle with a longer washing time.
The spray arms are blocked.
Make sure that the spray arms are not blocked and are free to rotate.
The dishes are not
drying enough
The rinse aid dispenser is empty or the setting is too low.
Fill the rinse aid dispenser. Increase the rinse aid setting.
Dishes are loaded improperly.
Reload the dishwasher as shown in “Preparing and loading dishes” on page 9
The cycle you chose did not include drying.
Choose a cycle with drying.
You can solve many common appliance problems saving you the cost of a possible
service call. Try the suggestions below before making the call to see if you can solve
the problem:
TROUBLESHOOTING
Loading ...
Loading ...
Loading ...