Loading ...
Loading ...
Loading ...
29
4.3 Start Charging
1. Remove the connector from the holster.
2. Plug the connector into the EV charging port.
3. Choose one of the following ways to start a charge session:
—
If the Auto Start function is enabled in the Autel Charge app, the charger will
automatically start charging once the connector is properly connected.
—
Use the Autel Charge app by tapping Start on the Charge screen.
—
If a charging schedule has been set in the Autel Charge app, the charger will
initiate a charge session automatically as scheduled.
—
If the RFID function is enabled, tap your RFID card on the RFID reader.
NOTE
Ensure the EV is charging. The charging LED on the charger should be flashing green. If
you suspect the vehicle is not charging properly, try reconnecting the charging cable or
contact customer support.
4.4 Stop Charging
NOTE
If you disconnect the EV charging cable during the charge session, the charger
automatically disconnects the power supply. This stops all charging operations.
When the vehicle is fully charged, the charger will automatically disconnect the power
supply.
1. To stop charging, choose either of the following two ways:
Wait for the charge session to end and no further actions are required in the
case of scheduled charging or Auto Start.
—
The charging LED will illuminate solid green.
—
The Autel Charge app displays that your EV is fully charged.
End the charge session by tapping Stop on the Charge screen. Or, if the RFID
function is enabled, tap the RFID card on the RFID reader again.
2. Unplug the connector from the EV and return it to the holster.
Loading ...
Loading ...
Loading ...