Loading ...
Loading ...
Loading ...
BISSELL.com 5
Emptying the Dirt Tank
We have additional tips for maintaining your machine at support.BISSELL.com.
1. Press the tank release
button and pull out to remove
dirt tank.
2. Hold the dirt tank over
a trash container. Press the
bottom release button to empty.
Once empty, close the lid.
3. Twist cyclone clockwise
and pull down to remove from
tank.
4. Clean cyclone with warm
water and mild detergent.
Let dry for 24 hours before
reinstalling.
5. Twist cyclone counter-
clockwise to reinstall.
6. Place tank back on vacuum
and press firmly until it clicks
into place.
WARNING To reduce the risk of electric shock, turn power OFF and disconnect plug from electrical outlet
before performing maintenance or troubleshooting checks.
Maintaining the TurboEraser® Tool
For more helpful maintenance tips, check out support.BISSELL.com.
1. Twist gray collar counter-
clockwise, until slot appears,
then separate faceplate.
2. Remove brush roll, belt
and paddle wheel. Inspect
for damages and replace if
necessary.
3. To reassemble, align two
clips on each end of paddle
wheel with belt on and pop
back into place. Place brush
roll with belt back in. Faceplate
will not close properly if all
parts are not aligned correctly.
Loading ...
Loading ...
Loading ...