Loading ...
Loading ...
Loading ...
12
Connecting USB Devices
The USB port may be used to connect USB storage class devices (thumb drive,
digital audio player, etc.). This USB connection also provides a 1A output for device
charging. If this output is exceeded, an error message will display and the output
will be disabled. Devices may be plugged directly into the USB port or use the JL
Audio Combo 3.5 mm Audio Jack and 9 Wire USB Port for Panel-Mounting (XMD-
USB/3.5MM-PNL). An appropriate USB cable for your device is required to make this
input connection.
Once connected, press the
button and select USB from the SOURCE: Select
menu to access the connected device with the following controls:
Forward
• Press to select the next track
• Press and hold to fast-forward
Backward
• Press to select the previous track
• Press and hold to fast-rewind
Mute/Pause/
Resume
• Press to pause or resume playing the current selection
• Press and hold to access Shuffle and Repeat options from
the USB: Play Options menu
• When the Audio Zone Levels screen is displayed, press to
mute audio. You may also press and hold VOL/SEL to mute audio.
Back/Menu
• Press to access the USB: Main Menu options
• Press to go back or return to the Now Playing Screen
• Properly secure the connected device before driving to prevent damage from
dropping or sudden acceleration/braking.
• Control, functionality and display may vary depending on the type of
device connected.
• Connections to computers or portable hard drives are not supported.
• Connections via USB hubs are not supported.
Loading ...
Loading ...
Loading ...