Loading ...
Loading ...
__,dm_ __m_m_,___ ® MODELS QP130BL.QP130BLC.QP130SS.QP130SSC
QP130WW * QP130WWC * QP136BL * QP136SS * QP136WW
Page 3
El Use the diagram below, for placement of
proper
ductwork and electrical cutout in cabinet or wall. For a
non-ducted installation, DO NOT cut a duct access hole.
* Note the extra wood shim and mounting screw near
the cabinet front, 4-7/8" to the right of the cabinet
center line.
HOOD MOUNTING SCREWS (5) l31A'' X 10"
VERTICAL DUCTING
115/8'' (30"hood) 115/8'' (30"hood)
*'-'- 145/8'' (36"hood) _ 145/8'' (36"hood)
CABINET FRONT _ 47/8"*
CABINET I _Q;" _"_
l VERTICAL DUCT I123/8"
4½"½ | ACC ES_
t t ELECTRICAL
WOOD SHIMS ACCESS HOLE
recessed-bottom CENTER
cabinets only) LINE (in cabinet bottom)
/
\
I
WOOD SHIMS J31A'' X 10"
(recessed-bottom [ HORIZONTAL DUCTING
cabinets only) CABINET FRONT 1½"
47/8'' _ 3/8,,_________.j
t 4t' HORIZONTALDUCT T
CABINET JL ACCESSHOLE
BOTTOM
8½"
.,--- 115/8"(30" hood) 115/8" (30" hood)
145/8'' (36" hood) 145/8" (36" hood)
HOOD t ELECTRICAL
MOUNTING CENTER ACCESS HOLE
SCREWS (5) LINE (in wall)
HOOD MOUNTING SCREWS (5)
115/8"(30"hood)
i 145/8"(36"hood)
I
:lCAB'NET
BOTTOM
WOOD SHIMS t
(recessed-bottom CENTER
cabinets only) LINE
115/8" (30"hood)
145/8'' (36"hood)
47/8''
r 7-IN. ROUNDDUCTING
81_2 I' ,=...._
ELECTRICAL t
ACCESS HOLE
(in cabinet bottom)
PREPARE THE HOOD
Remove parts bag from inside the foam packaging end
cap.
Remove all protective polyfilm from the hood (stainless
steel hoods only).
PULL /
DOWN
LIFT ALUMINUM
OUT FILTERS
Remove the Aluminum Filters from the hood.
DAMPER /
DUCT CONNECTOR
[_ emove 2 screws holding Damper /Duct Connector to
hood. Remove damper/duct connector from inside the
hood.
FOR DUCTED INSTALLATIONS =Skip to Step 9.
Loading ...
Loading ...
Loading ...