Sencor SLE 2473TCS LED television

User Manual - Page 19

For SLE 2473TCS.

PDF File Manual, 56 pages, Read Online | Download pdf file

SLE 2473TCS photo
Loading ...
Loading ...
Loading ...
EN 19
EN
Revision 03/2022Copyright © 2022, Fast ČR, a. s.
Menu
Note about updating the FastScan and consumption list:
The device will check the channel list of the operator FastScan for up to date channel
list availability when switched into Standby mode. To do this, simply switch off the TV
at the selected Satellite input. The device will not stop to power the satellite antenna
during the update, the status LED may flash several times. Only after completion of the
update (about 3 minutes) will its consumption fall below the prescribed value of0.5W.
7.1.2. Advanced/Special tuning
You can perform advanced and special tuning in the Dish Setup of the satellite.
You can scan one or more satellites, one or more transponders by selection from their
list using the button OK. After selection press blue button and select from the following
window three selections:
1. Scanning mode between Default (is searched according to the list on TV), Blind scan
(the slowest, searches many modes and parameters of broadcasting regardless if any
broadcasting exists there), Network (first is scanned for the network table NIT and
then are scanned the transponders found there).
2. Channel type select – Free/FTA, for which reception is not necessary any card of
conditional access (CA) and Scrambled (sometimes called “coded”), where you need
an access card. The scrambled channels are displayed in the list by asymbol of
akey.
3. Service type – select DTV and Radio.
Example of advanced tuning process Skylink:
Set correctly according to your antenna system the satellites‘ reception Astra 23,5°
east (Astra 1E, 1G, 3A).
(Or check the presence and setting of individual transponders according to the list of
the operator.)
Select (check by pressing OK) in the list of this satellite the transponder 12070 MHz,
horizontal polarization, symbol rate 27500 kSym/s.
After you press Scan select Network tuning. The television will first find the NIT table
on TP12070 and then tunes in the programs, which are not listed there.
(If you receive also the satellite Astra 19,2° east, tune programs from several
transponders of this satellite, if you paid for these programs and want to receive
them.)
You can delete from the extensive list of programs those, which you do not require,
e.g. because they belong to another operator, whose access card you do not own.
Loading ...
Loading ...
Loading ...