Loading ...
Remove packing tape from coffee
maker. Pull plug and extend cord
from cord storage located at the
back of the coffee maker. Plug into a
grounded outlet.
Press the power button. The power
button will illuminate.
Add 1 cup (237 ml/8 oz) of
water into a mug. Lift the water
reservoir lid and pour the water
into the reservoir. Do not fill past
the MAX or below the MIN fill
lines. Lower the lid and place your
mug on the drip tray.
NOTE: Do not use distilled water.
Lift and lower the handle. Do not
insert a K-Cup® pod. The brew
indicator light will flash to indicate
that the coffee maker is ready.
Press the brew button. The brew
indicator light will illuminate solid, then
begin to pulse while the coffee maker
is heating. After about 2 minutes,
the brew indicator light will illuminate
solid again and the water will begin
to dispense. Pour the hot water into
the sink.
The one-time setup process is now
complete and you are ready to brew!
1
3
5
2
4
6
Before You Brew
Add desired amount of water into a
mug (177 ml/6 oz minimum,
355 ml/12 oz maximum). Lift the
water reservoir lid and pour the
water into the reservoir. Do not fill
past the MAX or below the MIN fill
lines. Lower the lid and place your
mug on the drip tray.
Lift the handle. Place a K-Cup® pod in
the K-Cup® pod holder. Lower the handle
completely to close the lid. The brew
indicator light will flash to indicate that
the coffee maker is ready. Do not remove
the foil lid on the K-Cup® pod.
High Altitude Brewing: While holding the coffee
maker handle up, push down slowly on the K-Cup®
pod in the pod holder until the bottom of the
K-Cup® pod is punctured by the exit needle.
STRONG
STRONG
Brew Button
Plug & Power Fill & Place
Lift & Lower Cleansing Brew
Fill & Place Mug
7
Press the brew button. The brew
indicator light will illuminate solid, then
begin to pulse while the coffee maker
is heating. After about 2 minutes, the
brew indicator light will illuminate solid
again and the beverage will begin to
dispense. Brewing is complete when
the brew indicator light is no longer
illuminated. When complete, lift the
handle and recycle the used K-Cup®
pod in 3 easy steps*. K-Cup® pods are recyclable in select
locations; they may not be recyclable in your area.
CAUTION: While brewing, there is extremely hot water in the K-Cup® pod holder. To avoid injury, do
not lift the handle during the brewing process.
Brew Button
Brew & Enjoy!
Lift & Place Pod
Coffee Maker
Features
Auto Off: Automatically turns your
coffee maker off 90 seconds after
the last brew for energy savings.
Cord Storage: Makes transporting your
coffee maker convenient and
keeps countertops tidy.
Travel Mug Friendly: Remove the drip
tray to accomodate a travel mug.
STRONG
STRONG
STRONGSTRONG
STRONGSTRONG
Brew Your First Cup
Some municipalities require additional steps.
May not be recyclable in your area.
WWW.KEURIG.CA/RECYCLABLE
POD IS HOT.
ALLOW TO COOL
AFTER USE.
2
EMPTY
CONTENTS OR COMPOST.
FILT ER CAN REMAIN.
3
RECYCLE IN
SELECT LOCATIONS.
PEEL
LID AND DISPOSE.
1
Loading ...
Loading ...
Loading ...