Loading ...
Loading ...
Loading ...
9
Cleaning carpet / upholstery
CAUTION! When the cleaner is turned off residual water or cleaning
uid may leak out, it is advised that you have a cloth ready during
use to lay the cleaner on when not in use.
1. Plug the cleaner into an easily accessible socket close to the
working area and turn on the power.
2. Push the on/off switch to I position.
3. Push the cleaner forward in a straight line on the carpet/
upholstery. To spray cleaning solution onto the area, press the
spray button and make gentle forward and backward movements
to work the solution into any stubborn stains.
4. Now go back over the treated area and the dirty water will be
vacuumed up.
5. Repeat this slightly overlapping the area you have treated.
6. In the event of really stubborn stains, go over the area several
times, allowing the area to dry between each clean.
7. When the dirty water tank lls to the ‘Max’ level mark, it needs
to be emptied (see “Cleaning and Maintenance’’ section).
8. When you have nished cleaning, turn the cleaner off and
remove the plug from the socket.
Instructions for Use
Loading ...
Loading ...
Loading ...