Loading ...
Loading ...
Loading ...
Table7:CooktopCareChart
CleaningandMaintenance
Metal marks: Iridescent stain
Hard Water Spots - Hot cooking liquids
dripped on surface
Surface scratches - Small scratches are to
be expected on the glass surface, but do not
affect cooking. In time, small scratches will
become smoother and much less noticeable
with daily use of the glass ceramic cooktop
cleaner.
Pans with aluminum, copper or stainless steel bases may leave
marks. Treat immediately after surface has cooled with glass
ceramic cooktop cleaner. If this does not remove the marks, try a
mild abrasive (Bon Ami®, Soft Scrub® without bleach) with a
dampened paper towel. Rinse and reapply creme. Failure to
remove metal marks before the next heating makes removal very
difficult.
The minerals in some water can be transferred onto the surface
and cause stains. Use undiluted white vinegar, rinse and dry.
Recondition with glass ceramic cooktop cleaner.
Apply Cleaning Creme before using to remove sand-like grains
and grit such as salt and seasoning.
Can be reduced by using pans with bases that are smooth, clean,
and dry before use. Use recommended glass ceramic cooktop
cleaner daily on the cooktop.
Care and Cleaning - Oven
Self Cleaning the Oven Our ovens feature a self-cleaning function that eliminates the manual labor
involved with cleaning your oven. During self-cleaning, the oven uses a very high
temperature to burn away food soil and grease.
• Do not clean parts or accessories in the self-clean oven.
• It is common to see smoke and/or an occasional flame-up during the Self-
Clean cycle, depending on the content and amount of soil remaining in the
oven. tf a flame persists, turn off the oven and allow it to cool before opening
the door to wipe up the excessive food soil.
• The oven door locks at the beginning of the self-clean cycle.
• The oven light does not operate during this mode.
• During Self-Clean, the kitchen should be well ventilated to help eliminate
odors associated with Self-Clean. Odors will lessen with use.
• Four hours is the preset length of cleaning. The range can also be set to clean
for 3 or 5 hours.
• The mode automatically stops at the end of the clean hours.
• When the oven cools after cleaning, the automatic door lock will release and
the door can be opened.
• To cancel or stop while the mode is operating, press OFR
• The door will not unlock until the oven reaches a safe temperature.
Preparing the Oven for Self Clean
WARNING
A flexible door gasket is necessary for a good seal. Do not clean, rub,
damage or move the gasket.
1. Remove all utensils and bakeware.
2. Remove oven racks. If oven racks are left in the oven during the self-clean
cycle, they will permanently lose the shiny finish and change to a dull dark fin-
ish. See Oven Cleaning Chart for proper care.
3. Wipe up excessive soil, spills and grease before self-cleaning the oven.
Excess grease will cause flames and smoke inside the oven during self-clean-
ing.
English 23
Loading ...
Loading ...
Loading ...