Loading ...
Loading ...
Loading ...
Installation
27
EN
Spacers
To ensure proper cooling of the condenser,
the appliance must not be placed too close
to the wall. To prevent this, the appliance
comes complete with two plastic spacers
which must be fitted to the top of the
condenser.
To position the spacers fit them between the
vertical fins of the condenser (1), then rotate
them by 90 degrees clockwise or
counterclockwise, to secure them (2).
Positioning
Position the appliance on a firm, level
surface.
We recommend moving the appliance very
carefully in order to avoid damaging the
floor (especially if the refrigerator is
positioned on wooden floors or linoleum).
If the floor is not perfectly level, use the four
adjustable feet on the front part of the
appliance.
Level the appliance horizontally adjusting its
feet.
Lean the appliance slightly towards the rear
part to facilitate proper door closure.
Loading ...