Ryobi RY401010BTL 40V 18 in. 2-in-1 Cordless Battery Walk Behind Push Mower Tool Only

OPERATOR’S MANUAL - Page 15

For RY401010BTL.

PDF File Manual, 40 pages, Read Online | Download pdf file

RY401010BTL photo
Loading ...
Loading ...
Loading ...
11 — English
TROUBLESHOOTING
IF THESE SOLUTIONS DO NOT SOLVE THE PROBLEM CONTACT YOUR AUTHORIZED SERVICE DEALER.
PROBLEM POSSIBLE CAUSE SOLUTION
Handle not in position. Handle knobs are not tight. Securely tighten upper and lower handle
knobs.
Mower not starting. Battery is low in charge.
Start key not installed.
Charge the battery.
Install start key.
Mower cutting grass unevenly. Lawn is rough or cutting height not set
properly.
Adjust the cutting height.
Mower not mulching properly. Wet grass clippings sticking to the
underside of the deck.
Wait until the grass dries before mowing.
Mower hard to push. High grass, rear of mower housing
and blade dragging in heavy grass, or
cutting height too low.
Raise cutting height.
Mower vibrating at higher speed. Blade is unbalanced, excessively or
unevenly worn.
Bent motor shaft.
Replace the blade.
Stop the motor, remove start key and
battery. Inspect for damage. Have
repaired by an authorized service center
before restarting.
Motor stops while cutting. Cutting height set too low. Raise the cutting height.
This product has a Five-year Limited Warranty for personal,
family, or household use (90 days for business or commercial use).
For warranty details, visit www.ryobitools.com
or call (toll free) 1-800-860-4050.
Loading ...
Loading ...
Loading ...