Loading ...
Loading ...
Loading ...
2
Follow the illustrations and textual instructions below to complete the installation steps:
Installing the Stand
Installing the Stand or Wall Mount Bracket
Base Stand
Base Stand
Screws: M5×12
CAUTION
Be sure to disconnect the AC power cord before removing a base stand or installing
wall mount brackets.
The display on your TV is fragile. Make sure the TV screen is not scratched or
damaged by hard objects or from pressure.
After the installation is complete, make sure the TV is steady on a table or firmly
attached to a wall mount, before removing all protective film, if any.
Screws: M5×12
For
65"
Cable clamp
After the installation of the
base stand, put into the
power cord that needs to be
sorted, and then reset the
cable clamp
Open the cable clamp
before installing the
base stand
1. Carefully place your TV facedown on a soft, flat surface to prevent damage to the
TV or scratching to the screen.
2. Take out the 2 stands from the accessory bag and then insert the stands into the
back slots of the TV.
Tip:
Make sure to insert the stands according to the 'L' and 'R' directional marks
that are shown on the surface.
3. Secure the Base Stand to the TV with the 4 screws in the accessory bag tightly.
Loading ...
Loading ...
Loading ...