Loading ...
Loading ...
Loading ...
4. To shut the unit down, rotate the humidity knob to the OFF position.
Note: the fan will remain on for a short time to remove moisture from the internal coils.
While the unit is plugged in the power indicator will remain lit. Only removing the
plug will extinguish this light.
REMOVING COLLECTED WATER
1. Emptying the Bucket:
a. When the bucket is full the unit will shut down and the BUCKET FULL
indicator light will illuminate.
b. Do not move the unit at this point otherwise water may spill on the floor.
c. Press sides of bucket gently to unciip the bucket from the unit.
d. Remove the bucket as shown in the photographs below and empty the
bucket.
{./
e. Replace the empty bucket back into the unit and once seated correctly
the unit wiB start up again.
f. You should hear a dick when the bucket is in the correct position
If the bucket full light does not extinguish,
check that the float is correctly snapped
in place as indicated by the diagram.
Loading ...
Loading ...