Loading ...
Loading ...
Loading ...
8
If you press and hold the °C/°F button for 3 seconds, the unit will enter the “Fast Freeze” mode. In this mode,
press the and buttons to set the fast-freezing time. The setting time range is 1 to 10 hours, and the
default setting time is 3 hours. If you set the fast-freezing time longer than 4 hours, the unit will defrost itself at
the end of the “Fast Freeze” cycle. To stop the “Fast Freeze” function, again press the °C/°F button and hold it
for at least 3 seconds.
Defrosting
The freezer’s frost-free feature eliminates the need for manual defrosting. Defrosting takes place approximately
every 14 hours (except when in “Fast Freeze” mode); the defrost cycle lasts about 15 minutes. Melted water
from the defrosting collects in a drip tray where it is evaporated. During the process of defrosting, the
temperature display may be higher than the set temperature.
You can force the unit into defrost mode at any time by pressing and holding the button for 3 seconds.
NOTE:
If the unit is unplugged, turned off or experienced a power failure, you must wait 3 to 5 minutes before
restarting the unit. If you attempt to restart before this time delay, the appliance will not start.
When you use the appliance for the first time, or restart after having been shut off for a long time, there
could be a few degrees variance between the set temperature and the displayed temperature on the LED
readout. This is normal and is due to the length of inactivity. Once the unit runs for a few hours, everything
will be back to normal.
Sabbath mode
Press and hold buttons °C/°F and at the same time for at least 5 seconds to enter or exit Sabbath mode.
In this mode, LED will display "Sb". This mode turns off the displays, and the interior light and prevents them
from turning on again. Normal cooling operations will still take place. The compressor and the fan work
normally.
When the cabinet power off, it will not automatically exit Sabbath mode, and it will keep Sabbath
mode when powering on again. The Sabbath Mode will automatically turn off after 96 hours.
NOTES:
It is normal that the cabinet shows “HH” from time to time. If it occurs frequently or lasts for a long time,
you can restart the unit by unplugging it, then re-plugging it after 5 minutes. If the problem occurs again
after restarting, please contact customer service.
Before reconnecting the power, wait for 3 to 5 minutes. Otherwise, you could damage your appliance. If
you attempt to start the appliance before the end of this time delay, the appliance will not turn on.
If you turn on the appliance for the first time or after a restart, or after it has been out of operation for a
long time, there may be a temperature difference between the temperature inside the appliance and that
on the LED display. This is a normal event caused by the duration of the activation period. Leave the
appliance turned on for several hours and the temperatures will stabilize during operation.
Loading ...
Loading ...
Loading ...