Loading ...
Loading ...
Loading ...
Window Types and Requirements
Note:
·The description for below installation is for the standard window. If it’s other types of
window, you may need to adjust the window.
·If you need to install the air conditioner at the small window, you may not need to use
the accordion panel sub-assy. Please refer to requirement of window size for details.
·All parts used for supporting air conditioner should be fixed at solid wooden strap,
brick or metal.
·Socket must be installed at the position where the power cord is available.
Standard window
25“-36"
13.5" Min.
Weather-proof Type Window
The height of window frame is higher than windowsill for some weather-proof type window,
which will affect the installation of air conditioner. In this case, before installing the air
conditioner, add wooden strap on the windowsill, and fix the wooden strap at the windowsill.
Specification of Wooden Strap
Width: about 2”
Length: same to the inner frame size of window
Height: Put the wooden strap on the windowsill, top part of wooden strap and window frame
should be at the same horizontal level, or higher than the top part of window frame for
about 1/4"-1/2"
1/4"-1/2"
Wooden Strap
Windowsill
Inner Wall Side
Weather-proof
Window Frame or
Plastic Window Frame
Requirements before Installation
WARNING
·Observe all governing codes and ordinances.
·Do not use damaged or non-standard power cord.
·Be caution during installation and maintenance. Prohibit incorrect operation to prevent
electric shock, casualty and other accidents.
Selection of Installation Location
Basic requirement
Installing the unit in the following places may cause malfunction. If it is unavoidable, please
consult the local dealer:
1. The place with strong heat sources, vapors, flammable or explosive gas, or volatile objects
spread in the air.
2. The place with high-frequency devices (such as welding machine, medical equipment).
3. The place near coast area.
4. The place with oil or fumes in the air.
5. The place with sulfureted gas.
6. Other places with special circumstances.
7. It’s not allowed to be installed on the unstable or motive base structure (such as truck) or in the
corrosive environment (such as chemical factory).
Requirement of complete unit
1. There should be no obstruction near air inlet and air outlet.
2. Select a location where the condensation water can be dispersed easily and won't affect
other people.
3. The location should be able to withstand the weight of the unit and won't increase noise
and vibration.
4. Select a location where the noise and outflow air emitted by the outdoor unit will not
affect neighborhood.
5. The location should be able to withstand the weight of unit.
6. Select a location which is out of reach for children and far away from animals or plants. If it is
unavoidable, please add fence for safety purpose.
7. Please try your best to keep far away from fluorescent lamp.
01 03 05 07 09 11 13 15
17 19 21 23 25 27
02 04 06 08
10 12 14 16
18 20 22 24 26 28
Loading ...
Loading ...
Loading ...