Loading ...
Loading ...
Loading ...
NOTE:Whenperformingthefeflowingstep,
besurethestarterropeisnotcaughtunder
thecableclampsThestarterropemust
hang freely to operate properly.
CabIe !
clamps
Starter rope
_ Throttle
cable
7. Align one cable clamp above the tube befts
and the other below the starter rope han-
dle. InstaII the cable clamps one at a time
around the tube and throttle cable
NOTE: Ensure throttle cable is in groove of
clamps and lies fiat against the upper handle
tube after installation (see iIlustration above).
KNOW YOUR TRIMMER
READTHISiNSTRUCTiONMANUALANDSAFETYRULESBEFOREOPERATINGYOURUNIT
Compare the illustrations with your unit to familiarize yourself with the location of the various controls
and adjustments. Save this manual for future reference.
Throttle Trigger
Starter Rope
Handle
Upper Handte
ON/OFF
Switch
Primer Bulb Muffler
Lower Handle
Shield
ON/OFF SWITCH
The ON/OFF sw_chisused to stop engine To
stop the engine, move the switch to the OFF
position
PRIMER BULB
The PRIMER BULB removes air from the car-
buretor and fue} lines and fills them with fuel.
This allows you to start the engine with fewer
puils on the starter rope Activate the primer
_-Trimmer Head
J
buib by pressing it and albwing it to return to
its poginal form
CHOKE
The CHOKE helps to supply fuel to the engine
to aid in cold starting. Ac_vate the choke by
moving the choke lever to the FULL CHOKE
position After the engine attempts to start, move
the choke lever to the HALF CHOKE position.
Once engine has started, move the choke lever
to the OFF CHOKE position.
Loading ...
Loading ...
Loading ...