Loading ...
Loading ...
Loading ...
8
ENGLISH
[10] CHANNEL 1 AND 2 GAIN
MIC input (XLR). This control permits the gain for MIC input to be set with a range from 0 dB to -50
dB. If the LINE INPUT (TRS jack) are in use the gain range permitted is from +20 dB to -30 dB. All the F
10XR’s MIC-LINE inputs are supplied with an 80 Hz Hi-pass filter. Enable the 80 Hz Hi-Pass filter when
using microphone for voice to reduce low frequency pop, bump and rumble noises.
[11] CHANNEL 3/4 AND 5/6 GAIN
MIC input (XLR). This control permits the gain for MIC input to be set with a range from 0 dB to -50 dB.
LINE INPUT (TRS jack) have a fixed input level gain.
[12] CHANNEL 7/8 AND 9/10 GAIN
STEREO LINE INPUT (TRS jack). The control allows a gain range from +20 dB to -30 dB.
[13] LEVEL METER
This 12-LED element level meter allows user to control the Main Mix output level. Keep the output level
below “CLIP” indication to avoid overloaded signals that can cause distortion.
[14] COMPRESSORS
Input channels 1 and 2 are provided with intuitive and powerful single control dynamic compressors.
With thresholds and ratio parameters optimally designed, the F 10XR’s compressors allow even the
most dynamically demanding signals to be controlled.
[15] IN USB - IN 9/10 BUTTON
USB IN determines that the stereo audio channels played from an external computer connected to the
USB port are routed to the stereo channel 9/10. When the button is in upper position (not pressed)
the audio coming from LINE INPUT 9/10 is routed to MAIN MIX; If the USB IN button is pressed the
audio coming from an external computer is routed to the stereo channel 9/10; in this instance the USB
audio substitutes the analog audio input and takes advantage of all the features provided by the stereo
channel, such as EQ, AUX send, BAL and rotary knob control.
[16] PHANTOM POWER +48 V CH1/4 SWITCH
Dedicated to the Mic inputs, this switch enables the +48 V Phantom Power to Mic inputs: 1-4. Enabling
the Phantom power is necessary in the presence of Condenser and Electret Microphones or in case of
D.I. box usage.
ON
OFF
[17] EQ (MONO CHANNELS)
All the F 10XR’s mono channels and stereo channel 3/4 and 5/6 are provided with a sophisticated and
precise 3-band EQ. Low frequency control sets in at 100 Hz with a gain of +/-15 dB and shelving curve.
High frequency control sets in at 10 kHz with a gain of +/-15 dB and shelving curve. Mid frequency
control sets in at 1250 Hz with a gain of +/-15 dB and bell curve.
[18] EQ (STEREO CHANNELS)
Stereo channels 7/8 and 9/10 are provided with HIGH and LOW EQ. Hi frequency control sets in at 10
kHz with a gain of +/-15 dB and shelving curve. Low frequency control sets in at 100 Hz with a gain
of +/-15 dB and shelving curve.
FRONT PANEL FUNCTIONS
Loading ...
Loading ...
Loading ...