Loading ...
Loading ...
Loading ...
3. Put the cutting line through the hole. Push the cutting line
until it exits the opposite hole.
4. Pull the cutting line through until there is an equal
quantity of cutting line on each side.
5. Turn the spool cap clock-wise to wind the cutting line
into the trimmer head. Keep approximately 5 in of cutting
line above out of each side of the trimmer head.
11 TRANSPORTATION AND
STORAGE
WARNING
Remove the battery pack from the machine before
transportation and storage.
11.1 MOVE THE MACHINE
When you move the machine, you must:
• Stop the machine.
• Remove the battery pack.
11.2 STORE THE MACHINE
• Remove the battery pack from the machine.
• Make sure that children cannot come near the machine.
• Keep the machine away from corrosive agents such as
garden chemicals and de-icing salts.
• Secure the machine during transportion to prevent
damage or injury. Clean and examine the machine for any
damage.
12 TECHNICAL DATA
Type Cordless, battery powered
Motor 80V
No load speed 5000 / 6000 (±10%) RPM
Cutting line diameter 0.095" / 0.080" (2.4 mm /
2.0 mm)
Cutting path diameter 14 in. /16 in. (35.6 cm / 40.6
cm)
Feed Type Bump Feed
Weight (without battery
pack)
7.9 lbs (3.6 kg)
Battery model BAB727/2901302 and other
BAB series
Charger model GCH8020/GCH8040 and
other CAB series
The recommended ambient temperature range:
Item
Temperature
String trimmer storage tem-
perature range
32°F (0°C) - 113°F (45°C)
String trimmer operation
temperature range
32°F (0°C) - 113°F (45°C)
Battery charging temperature
range
39°F (4°C) - 104°F (40°C)
Charger operation tempera-
ture range
39°F (4°C) - 104°F (40°C)
11
English
EN
Loading ...
Loading ...
Loading ...