Loading ...
Loading ...
Loading ...
Door Removal Instructions
LY_Orsto ,_nu
S¢_e_ Center
L_;,]o Sore
Tools Necessary:
ana
Flat Head
Screw Driver
/OR
Adjustable
/Vr_,DCF
3/8
Fixed
wrencn
_.\
_Top Hinge
Cove[
TopHinge
DOOR REMOVAL INSTRUCTIONS:
If your refrigerator will not fit through an entrance area. you can reduce its size by
removing the doors. Check first by measunng the entrance.
IMPORTANT: Before you begin, turn the refrigerator temperature control to "0" and
remove the electrical power cordfrom the wall outbt. Remove food from door shelves.
1 Disconnect ebctricaH supply.
2. Remove toe grille (see page 4 to barn how,.
To remove freezer door:
1 Remove top hinge cover and screws.
2. Trace around the hinge with a soft lead pencil. This makes reinstallation easier.
3. Remove top hinge and lift door off bottom hinge pro.
4 Reverse this procedure to reinstall freezer door.
_Pin
Center
Hinge
4, Detach the water tube from the connector located below the door. The connector
releases when you press its outer sleeve inward.
NOTE: If refrigerator has been used. have a container ready to catch excess water
Irom tube,
5. Remove the bottom hinge screws and hinge, holding the door as its weight rests
on the wood block. Lay the door on its side to avoid damage to cable and tube.
6, Remove the center hinge screws and hinge. Ensure plastic washer stays on
hinge pro.
7 Reverse this procedure to reinstal refrigerator door. When both doors are
reinstalled, connect water line by inserting tube and pushing until mark touches
face of fitting Connect cable, replace toe grille, and plug in electrical power cord.
)
Fiat Head
Screwdriver TO DISCONNECT
1.Press outer ring againstface
removeIuoe
ousn until mark touches face of fitting
Loading ...
Loading ...
Loading ...