Loading ...
Loading ...
Loading ...
Drip Cup
LP tank is sold separately. Use only with an OPD (over-fill protection device) equipped LP tank. Fill
and leak check before attaching to grill and regulator. Place LP tank into hole in grill base with
tank collar opening facing to back as shown. Raise tank holder to hold LP tank securely in place.
Secure the regulator hose to the slot hole of right side panel with hose retaining pin.
Use (1) M4x13
screw to install the match holder to the right side panel .
Install the grease tray into the cart from back. Install the drip box into the grease tray from back.
Unscrew igniter cap from control panel. Insert one AA battery (provided) into battery slot with
positive end (+) facing outward. Screw cap back onto panel.
Roll grill into place of operation. Once in place, press down on the locking levers of both Swivel
Casters with Brake to lock casters in place, preventing grill from moving during grill operation.
See bottom figure below.
13
M4x13 Shoulder Screw
Qty: 1 pc
31
Loading ...
Loading ...
Loading ...