Loading ...
Loading ...
Loading ...
TAILLIGHT / BRAKELIGHT LAMP REPLACEMENT
1. Remove the harness connector
w
from the back of the light assembly
q
.
2. Turn the lamp counter-clockwise to
remove it.
3. Apply dielectric grease to the socket
and install the new lamp.
4. Reinstall the harness connector
w
.
5. Test the light for proper operation.
SPARK PLUGS
SPARK PLUG RECOMMENDATIONS
Refer to the Specifications section for the recommended spark plug type and
gap for your vehicle.
NOTICE
Using non-recommended spark plugs can result in serious engine damage.
Always use POLARIS-recommended spark plugs.
PLUG CONDITION
TORQUE SPECIFICATION
New Spark Plug 12 Nm (9 ft-lbs)
Previously Installed Spark Plug 12 Nm (9 ft-lbs)
SPARK PLUG INSPECTION
Spark plug condition is indicative of engine operation. Check the spark plug
firing end condition after the engine has been warmed up and the vehicle has
been driven at higher speeds. Immediately check the spark plugs for correct
color.
CAUTION
A hot exhaust system and engine can cause burns. Wear protective gloves
when removing a spark plug for inspection.
131
MAINTENANCE
Loading ...
Loading ...
Loading ...