Loading ...
Loading ...
Loading ...
9.10.3. Sequence settings
Here's a quick reference chart for those parameters:
Parameter Range/Values Description/Function
Sync Clock In/
Out settings
1step (Gate/Clock),
1pulse, 24ppq, 48 ppq
Set Sync input/output type. Refer to external device
documentation to determine what the settings should be.
Sync Clock
Start
On Clock, On Gate
Start
Determines which sort of signal will start KeyStep 37.
Next Seq
End, Instant Reset,
Instant
Continue
Transposition
Input port
USB, MIDI, both
Sequences can be transposed by external devices. This decides
which ones are allowed to do so.
Transpose
Input channel
1-16, all Specifies the MIDI channel to obey for transposition.
Transposition
Latch
On, off
Decides whether a sequence will only be transposed while a key
is held down.
Transpose
Center Pitch
Full MIDI note range Notes above/below center transpose the sequence up/down
Velocity As recorded, fixed Disregard velocity or not
Fixed Velocity
value
0-127 Set the preferred value
Tap Tempo
average
2, 3, or 4 taps Number of taps to respond
Arm to Start On, Off
Determines the start/stop behavior of the sequencer when
working with external clock sources
Parameter Range/Values Description/Function
Tie Mode Tie to Previous, Tie to Next
Determines how notes are "tied" together in the
Sequencer
Arp
Random
Total, Pattern, Brownian
Specifies the type of randomness exhibited by the
arpeggiator when Arp Mode is set to "Random"
Sequence
Length
Update
Keep content beyond sequence length,
Clear content beyond sequence length
Specifies behavior of sequencer when user
shortens a sequence
Next we'll go through those parameters one-by-one.
Arturia - User Manual KeyStep 37 - The MIDI Control Center 104
Loading ...
Loading ...
Loading ...