Loading ...
Loading ...
Loading ...
6. PREPARING A BEVERAGE
6. 1 ONE CAPSULE (E. G. LUNGO)
1
Check ifthe water tank contains enough freshdrinking
water. Switch on machine. Power button starts blinking red
while machine is heating up for approximately 40 seconds.
Afterwards power button lights steady green. Machine is
ready to be used.
2
To adjust drip tray position: Turn drip tray counter
clockwise to unlock it. Lift it to the desired position and
lock it by turning it clockwise until it clicks. The driptray is
locked.
3
Place cup with correct cup size on drip tray. See
"BEVERAGE EXAMPLES" or package. Open locking handle.
Pull out capsule holder. Make sure rinsing tool is not
inside. Insert capsule in capsule holder. Insert itback into
machine. Close locking handle.
4
Push selection lever to the "HOT" or "COLD" position as
recommended oncapsule packs. Beverage preparation
starts.
STOP
5
Stay beside the machine throughout the preparation!After
reaching the desired level push selectionlever to the
“STOP” position. Machine stops preparation.
6
After finishing preparation the power button blinks redfor
about 5 seconds. During that time do not open locking
handle!
7
After extraction is finished open locking handle. Remove cup
from drip tray. Wait around 1.5 min if you want to prepare a
second extra big cup.
8
Pull out capsule holder. Remove used capsule. Put used
capsule in dustbin.
9
Rinse capsule holder with fresh drinking water from both
sides. Dry capsule holder. Insert itback into machine.
Enjoy your beverage!
10
Loading ...
Loading ...
Loading ...