Loading ...
Loading ...
Loading ...
17OPERATING INSTRUCTIONS
To delay stop(or start), press the Timer
button when the unit is power-on(or
power-off), then the "timer off" indicator(or
"timer on" indicator) will illuminate. Then
adjust timer setting, tap or hold the UP arrow
( ) or the DOWN arrow ( ) to change
delay timer at 0.5 hour increments, up to 10
hours, then at 1 hour increments up to 24
hours. The setting will be confirmed
automatically in 5 seconds, then the control
will count down the time(8h, 7.5h, 7h, etc.)
left, and all other settings will remain the
same as they were before the timer setting is
confirmed, until stop(or start).
Setting combination of “delay stop
delay start” or “delay start delay stop”
is workable. Both "timer off" indicator and
"timer on" indicator will illuminate then. The
timer setting can be canceled by either
pressing and holding the timer button for 2
seconds, or pressing the power on/off button
at any time to turn off the unit directly.
PRESS FILTER
RESET BUTTON
DO THIS:
TIMER: DELAY STOP/START FEATURE:
YOU WILL SEE HOW MUCH TIME IS
CHOSEN:
PRESS UP/DOWN
BUTTONS
THEN DO THIS:
PRESS TIMER
BUTTON
FIRST DO THIS:
turn off
turn on
Note: This feature can be used with any
combination of FAN Speeds (Low speed only
on 115V models), Timer, or Sleep Modes.
When in the "Heat" mode, the fan will run
continuously while heat is needed. The
temperature will automatically be maintained
anywhere between 62 °F(17 °C) and
86 °F(30 °C). When the room set
temperature is satisfied, the fan will cycle off
and on to circulate and sample the room air.
Eco feature is invalid in heating mode.
HEATING FEATURE:
YOU WILL SEE:
PRESS MODE BUTTON
CHOOSE DRY
DO THIS:
Loading ...
Loading ...
Loading ...