Loading ...
Loading ...
Loading ...
17CARE AND CLEANING & ENERGY SAVING IDEAS
• Do not block air flow inside with blinds,
curtains or furniture; or outside with shrubs,
enclosures, or other buildings.
• The capacity of the room air conditioner
must fit the room size for efficient and
satisfactory operation.
• Install the room air conditioner on the
shady side of your home. A window that
faces north is best because it is shaded
most of the day.
• Close the fireplace damper, floor and wall
registers so cool air does not escape up the
chimney and into the duct work.
• Keep blinds and drapes in other windows
closed during the sunniest part of the day.
• Clean the air filter as recommended in the
section “Care and Cleaning”.
• Proper insulation and weather stripping in
your home will help keep warm air out and
cool air in.
• External house shading with trees, plants or
awnings will help reduce the air
conditioner’s work load.
• Operate heat producing appliances such as
ranges, washers, dryers and dishwashers
during the coolest part of the day.
Energy Saving Ideas
Winter Storage
If you plan to store your air conditioner
during the cooler months, remove it carefully
from the window according to the
installation instructions, cover with plastic, or
return to its the original carton.
Cabinet Cleaning
• Be sure to unplug the air conditioner to
prevent shock or fire hazard. The cabinet
and front may be dusted with an oil-free
cloth or washed with a cloth dampened in a
solution of warm water and mild liquid
dishwashing detergent. Rinse thoroughly
and wipe dry.
• Never use harsh cleaners, wax or polish on
the cabinet front.
• Be sure to wring excess water from the
cloth before wiping around the controls.
Excess water in or around the controls may
cause damage to the air conditioner.
The PureAir
TM
filter should be replaced
regularly to achieve optimal results.
To remove the filter, grab the fabric tabs on
either side of PureAir filter and pull out.
Note: If the PureAir
TM
filter is installed
properly, the PureAir
TM
Filter indicator will
glow white. Otherwise reinstall the filter.
3. Reinstall the Dust Filter and air inlet grille.
To install the PureAir
TM
Filter:
1. Remove the Dust filter as instructed in the
Dust filter cleaning section.
2. Insert the PureAir
TM
filter in the reserved
space behind the Dust Filter as shown
below.
Loading ...
Loading ...
Loading ...