Loading ...
Loading ...
Loading ...
Lane Departure Prevention Function
117
■ Canceling Lane Departure Prevention Function
●
Canceling by driver operation
Any of the following operations temporarily cancels Lane Departure Prevention Function.
While temporarily canceling this function, the lane indicator turns gray.
• Depressing the brake pedal strongly
• Operating the turn signal lever
• The system determines that the driver operates the steering wheel to make a lane
change.
• Turning on the hazard warning flasher switch
●Automatic cancellation by the system
Under the following conditions, Lane Departure Prevention Function is temporarily can-
celed.
While the function is temporarily canceled, the lane indicator turns gray.
• The system does not detect the lane markings.
• The vehicle speed is less than approximately 37 mph (60 km/h) or is more than approxi-
mately 100 mph (160 km/h).
• Vehicle Dynamics Control or Traction Control Function is activated.
• Any door (except the rear gate/trunk) is opened.
• The driver’s seatbelt is unfastened.
• The electronic parking brake is applied.
• The select lever is moved to a position other than “D” or “M”.
- Lane Departure Prevention Function can be resumed after the select lever is returned
to the “D” or “M” position.
• Entering a sharp curve
• On a sharp curve
• Due to the road conditions
• Due to another system operating
• The EyeSight system has a malfunction. (EyeSight warning indicator: Yellow)
Page 154
• The EyeSight system has stopped temporarily. (EyeSight temporary stop indicator:
White)
Page 156
B2632BE-A.book 117 ページ ２０２２年１２月２３日 金曜日 午前９時１１分
Loading ...
Loading ...
Loading ...