Loading ...
Loading ...
Loading ...
Most laundering problems are easily solved if you understand the cause. Using the
charts below will save you time and money by helping you avoid unnecessary service
calls.
Problem
Not Drying
Satisfactorily
Possible Cause Solution
Lint screen is clogged with lint.
Restricted air movement.
Exhaust vent or outside exhaust
hood is clogged with lint.
Clean lint screen.
Run dryer for 5-10 minutes. Hold
hand under outside exhaust hoodto
check air movement. Ifyou do not feel
air moving, clean exhaust system of
lint or replace exhaust vent with rigid
metal or flexible metal vent (see
"installation Instructions").
Exhaust vent is crushed Replacewith rigid metal or
or kinked, flexible metal vent (see"installation
Instructions").
Gas valve on supply line Open all valves.
is closed.
Timer or the temperature Select the right cycle for the types
control is set on AIR DRY of garments beingdried (see
or AIR FLUFE "Dryer Use").
Load not contacting the Level dryer (see "installation
sensor strips and automatic Instructions").
cycle ending early.
Fabric softener sheets Use only one softener sheet per load
blockingoutlet grill, and only use it once.
Dryer located in room with Proper operation of dryer cycles
temperature below 45°F (7°C). requirestemperatures above45°F (TC).
Large amount of moisture Expect longer dry times with items
in the load. that hold more moisture (cottons).
Cold rinse water used. Expect longer dry times, but you are
saving energy and reducing wrinkles.
Load too large and bulky Separate load to tumble freely.
to dry quickly.
Dryer Will Power cord not firmly Plug into a grounded 3 prong outlet.
Not Run plugged in.
Fuse blown or circuit Replacefuse or reset breakers.
breaker tripped.
28
Loading ...
Loading ...
Loading ...