Napoleon BILEX485RBPSS-1-RU BUILT-IN LEX 485 RB REAR BURNER

User Manual - Page 7

For BILEX485RBPSS-1-RU. Series: BUILT-IN LEX
Also, The document are for others Napoleon models: BILEX485

PDF File Manual, 56 pages, Read Online | Download pdf file

BILEX485RBPSS-1-RU photo
Loading ...
Loading ...
Loading ...
7
EN
www.napoleongrills.com
N415-0434 DEC 19.18
Lighng Hole
!
!
O Posion
WARNING! Open lid.
WARNING! Ensure all burner controls are in the o posion. Turn on the gas supply
valve.
Main Burner
Lighng
Rear Burner Lighng
(Rosserie Burner)
(if equipped)
Side Burner Lighng
(If equipped)
1. Open grill lid. 1. Open grill lid. 1. Open side burner cover.
2. Push and turn any main burner knob slowly
to the ’hi’ posion. This acon will ignite the
pilot ame which will in turn light the selected
burner. If the pilot lights, connue to push
down on the control knob unl the burner
lights and then release.
2. Remove the warming rack. 2. Push and turn side burner control to
high posion.
3. If the pilot does not ignite, then
immediately turn the control knob back to the
o posion and repeat step 2 several mes.
3. Push and turn the rosserie burner
control knob slowly to the ‘hi’ posion.
This acon will ignite the pilot ame which
will in turn light the burner. If the pilot
lights, connue to push down on the burner
control knob unl the burner lights then
release.
3. Press and hold igniter buon unl
burner lights, or light by match.
4. If the pilot and burner will not ignite within
5 seconds, turn the control knob to the ‘o’
posion and wait 5 minutes for any excess gas
to dissipate. Either repeat steps 2 and 3 or
light with a match.
4. If the burner does not ignite, then imme-
diately turn the control knob back to the ‘o
posion and repeat step 3 several mes.
4. If the burner will not ignite within 5
seconds, turn the control knob to the
o’ posion and wait 5 minutes for any
excess gas to dissipate. Either repeat
steps 2 and 3 or light with a match.
5. If lighng the unit with a match, clip the
match into the supplied lighng rod. Hold the
lit match down through the grill and sear plate
while turning the corresponding burner valve
to high.
5. If the burner will not ignite within 5
seconds, turn the control knob to the ‘o’
posion and wait 5 minutes for any excess
gas to dissipate. Either repeat steps 3 and 4
or light with a match.
WARNING! The propane cylinder is equipped with an excess ow device. Unless all burners are
turned o prior to turning the cylinder on, only small ames and low heat will be achievable.
WARNING! Do not use the rear burner (rosserie burner) with the main burners operang.
Lighng Instrucons
Lights
Le
Burner
Right
Burner
Le Centre
Burner
Right Centre
Burner
N415-0434 DEC 19.18.indd 7 12/19/2018 2:07:58 PM
Loading ...
Loading ...
Loading ...