EGO CS1604 OPERATOR'S MANUAL

Loading ...

56V LITHIUM-ION CORDLESS CHAIN SAW — CS1600 37

Assembling The New Bar

and Chain

1. Remove the battery, allow the saw

to cool and tighten the oil tank cap.

2. Lay the new saw chain in a loop on

a at surface and straighten any

kinks (Fig. 24).

3. Place the chain drive links into the

guide bar groove. Position the chain

so there is a loop at the back of the

guide bar (Fig. 25).

4. Hold the chain in position on the

guide bar and place the loop around

the sprocket of the power head.

NOTICE: Small directional arrows are

engraved in the saw chain (Fig. 26a).

Another directional arrow is molded into

the housing (Fig. 26a). When looping

the saw chain onto the sprocket, make sure that the direction of the arrows on the

saw chain will correspond to the direction of the arrow on the housing. If they face in

opposite directions, turn over the saw chain and guide bar assembly (Fig. 26b.)

26a

26b

Sprocket

Tension Adjusting Pin

Guide Bar Slot

Rotation

Direction Arrow

Alignment Flange

Cutter Direction

Guide Bar Groove

Chain Drive

Links

Loading ...

EGO CS1604 Power+ 16" Chain Saw