Loading ...
Loading ...
Loading ...
13
DOOR HANDLE INSTALLATION
1. Remove the handle from the carton
and any other protective packaging.
2. Position the handle end caps over
upper and lower pre-installed shoul-
der bolts (A) that are fastened into
door, ensuring the holes for the set
screws are facing towards the hinge.
3. While holding handle firmly against
door, fasten the upper and lower Al-
len set screws (B) with the supplied
Allen wrench.
Upper
End Cap
Door
Lower
End Cap
Door
CAUTION
Wear gloves and use extreme CAUTION
when installing these handles. The round-
ed end of the handles may be sharp.
IMPORTANT
To ensure proper installation of handle,
please review these instructions and
illustrations thoroughly prior to installing
the handle.
Additionally, before installing the door
handle, make sure the door swing is cor-
rect. Your model will have either a right-
hand or left-hand door swing. Follow
instructions in the Use & Care Manual to
reverse the doors, if necessary.
Loading ...
Loading ...
Loading ...