Bosch KXF41V111/01 Built-in fridge-freezer combination

User Manual - Page 29

For KXF41V111/01.

PDF File Manual, 86 pages, Read Online | Download pdf file

KXF41V111/01 photo
Loading ...
Loading ...
Loading ...
Cleaning en
29
D Cleaning
Cl e a n i n g
Caution!
Avoid damaging the appliance and the
fittings.
Do not use abrasive, chloride or
acidic cleaning agents or solvents.
Do not use scouring or abrasive
sponges.
The metallic surfaces may corrode.
Never clean the shelves
or containers in the dishwasher.
The parts may become deformed.
Proceed as follows:
1. Switch off the appliance.
2. Pull out the mains plug or switch off
the fuse.
3. Take out the food and store in a cool
location.
If present: place ice pack
on the food.
4. If present: wait until the layer of frost
has thawed.
5. Clean the appliance with a soft cloth,
lukewarm water and a little
pH-neutral washing-up liquid.
Caution!
The rinsing water must not run into
the light or through the drainage
hole into the evaporation area.
6. Wipe door seal with clear water and
dry thoroughly with a cloth.
7. Reconnect and switch on appliance
and put in food.
Cleaning the equipment
To clean, take the variable parts out of
the appliance.
~ "Interior fittings" on page 25
Partition and vegetable container
cover
Taking out the partition
~ Fig. *
Press levers on the underside on
both sides, pull partition forwards, lift
and swivel out to the side.
Taking out the vegetable container
cover
Lift cover, pull forwards and swivel
out to the side.
Inserting vegetable container cover
and partition
~ Fig. +
1. Insert vegetable container cover.
2. Insert partition.
Note: In order to be able to insert
the partition, you must set the
humidity controller to the lowest air
humidity setting.
Telescopic rails
~ Fig. ,
Removing telescopic rails
1. Pull out telescopic rail.
2. Push lock in the direction of the
arrow.
3. Detach telescopic rail from the rear
pin.
4. Push telescopic rail together, push
backwards above the rear pin and
disengage.
Installing telescopic rails
1. Place the extended telescopic rail on
the front pin.
2. Pull the telescopic rail forwards
slightly until it engages.
3. Insert telescopic rail on the rear pin.
4. Push lock backwards.
Loading ...
Loading ...
Loading ...