Loading ...
Loading ...
Loading ...
RANGE CONTROL PANEL
Styling may differ depending on the model you selected.
ELECTRONIC CLOCK AND OVEN CONTROL
The electronic clock and oven control on your
Maytag rm_ge is used for the time-of-day clock,
timer, bake, broil, delay start and self-clean
functions. A beep will sound each time a function
pad is pressed. At the end of an operation,
consecutive beeps will sound.
The display on the control will flash when power is
first supplied to the range or if there is a power
failure. Once the time-of-day clock has been set
(see Setting the Clock, page 6), the display will stop
blinking.
The oven will automatically mrn off if it is left on
for 12 hours.
The ibllowing pads are found on your Maytag
electronic clock and oven control:
Cancel-Pad
Press this pad to cancel all operations except the
time-of-day clock and timer. If you are ever unsure
ff you've programmed the control correctly, press
the CANCEL pad and start over.
• and V Pads
Press oi" press and hold these pads to enter the
time or temperature desired. These pads are also
used to select Hi or Lo broil.
Timer Pad
The timer can be set from l minute to 9 hours, 50
minutes. It will count down by seconds (when set
for 1 minute) or minutes (when set for 2 minutes
or more time). See page 6 for instructions on
setting the timer.
Clock Pad
Use this pad to set the time-of-day clock. For
instructions to do this, see page 6.
PAGE 5
Loading ...
Loading ...
Loading ...