Loading ...
Loading ...
Loading ...
Water softening system/Special salt en
11
+ Water softening
system/Special salt
Water softening system/Special salt
To ensure good washing results,
the dishwasher requires soft water, i.e.
containing low amounts of lime,
otherwise white limescale will be
deposited on the utensils and inner
container.
Tap water above a specific
degree of water hardness must be
softened, i.e. descaled,
for use in a dishwasher. Water
is softened with special salt in the water
softening system of the dishwasher.
The setting and therefore the required
amount of salt
depends on the degree of hardness of
your tap water (see table).
Setting
The amount of salt dispensed can be
set to 4 levels, depending on the
hardness of your water. 0, 1, 2 or 3
displays light up (see table) according
to your selection. Factory setting: 1.
1. Determine the hardness of your tap
water. Your water utility can help you
here.
2. The required setting can be found in
the following water hardness table.
3. Open the door.
4. Switch on ( ON/OFF switch.
5. Hold down P > button and press
h START button until the ` Dry
indicator and )* Salt refill indicator
flash.
6. Release the buttons.
The )* Salt refill indicator ` Dry
indicator flash.The # indicator
lights up (= level 1).
To change the setting:
1. Press H < button until the required
level has been selected.
2. Press h Start button.
The ` and )* indicators go
out.The level selected is saved.
3. Close the door.
Water hardness table
$%&
&ODUNH
VRIW
PHGLXP
KDUG
KDUG
PPROO
+DUGQHVV
UDQJH
6HWWLQJ
Loading ...
Loading ...
Loading ...