Loading ...
Loading ...
Loading ...
Operation Basics
USER’S MANUAL 20
2.1 The User’s Interface
Click the software icon on the desk after you finished the software setting and equipment
connecting. Then a user interface will be showed as follows:
In addition to displaying waveforms, the display area is filled with many details about the waveform
and the oscilloscope control settings.
1.The Main Menu
All settings can be found in the main menu.
2.The Toolbar
3.Change DSO and DDS
4.The Horizontal Panel
The user can change Time/Div, Delay Time in the panel.
5.The Vertical Panel
The user can turn on/off the CH1/CH2/CH3/CH4. Also the user can change the CH1/CH2/CH3
/CH4 volt/div, coupling and probe attenuation.
6.The Trigger Panel
In this panel, the user can change the trigger mode, sweep, source and slope.
7. It shows the system time.
8. Marker shows Edge trigger level.
9. It shows the main time base setting.
10.It shows the CH1/CH2/CH3/CH4 information.
Readouts show the coupling of the channels.
Loading ...
Loading ...
Loading ...