Loading ...
Loading ...
Loading ...
www.SereneLifeHome.com6
Install Pedal
Install Front/Rear Reector
• Use multi-function tool to remove the nuts and spacers from
the left and right sides of the rear wheel.
• Install the training wheels, spacers and nuts in order as
shown in the diagram and lock them in place with a multi-
function tool. (The locking torque is not less than 18N.m)
• Training wheel height from the ground between 0.5-1cm is
best, before riding must conrm that all screws have been
tightened.
• Remove the nut with a wrench and take o both sides of
the training wheels.
• Install the kickstand into the corresponding frame screw
hole and tighten the nut with a wrench.
• Check the kickstand retraction and stand function.
Suggestion:
Install the kickstand after the user has mastered the balance
• Put the corresponding L/R pedals into the corresponding left
and right cranks, and use a multi-function tool to turn and
lock in the direction of the front wheel (the locking torque is
not less than 45N.m).
• Install the front reector (white) on the handlebar as shown
in the picture, lock it with a screwdriver.
• Install the rear reector (red) on the seat tube as shown in
the picture, and lock it with a screwdriver.
Loading ...
Loading ...
Loading ...