Loading ...
Loading ...
Loading ...
- 18 -
TRIGGER MODE: LOW HUMIDITY
In this mode, pressing the up or down button sets the low humidity trigger. The fan will
activate if the probe’s reading meets or falls below the trigger.
It will gradually ramp up until it reaches the ON Mode’s setting. If the probe’s reading rises
above your trigger, the fan will turn off. We recommend turning this trigger OFF when not in
use during set up by holding the up and down buttons together.
You may set this trigger above the high humidity trigger to create a range where the fan is
active.
ALARM SETTING: HIGH TEMPERATURE
In this mode, pressing the up and down button sets a high temperature alarm. The alarm will
sound and its icon will flash if the probe’s reading exceeds the set temperature.
To activate the alarm, leave the alarm mode. The alarm will turn
OFF if the probe’s reading falls below the trigger or if any button is pressed. You can also set
the alarm OFF by holding the up and down buttons together.
Note that this trigger can activate as long as you are in AUTO Mode,
even if you are viewing a different trigger within AUTO Mode.
Loading ...
Loading ...
Loading ...