Loading ...
Loading ...
Loading ...
16 | Sub-Zero Customer Care 800.222.7820
To replace the water filter:
1 To access the water filter, pull out on the bottom edge
of the grille and rotate upward. Refer to the illustration
below.
2 To remove the old filter, rotate counterclockwise
one-quarter turn, then pull out. It is normal for a small
amount of water to drip when the filter is removed.
3 Remove the new filter from packaging and remove the
plastic cap.
4 Insert the new filter into the manifold and turn clock-
wise.
5 Follow the instructions on the control panel. The filter
life cycle resets for approximately one year.
Water filter removal
WATER FILTER
Product Operation
Water Filtration System
The water filtration system supplies filtered water to the ice
maker and water dispenser (dispenser models) to produce
great-tasting water and ice.
IMPORTANT NOTE: When using the water filtration system
for the first time and after filter replacement, it is neces-
sary to clear any air from the system and allow the filter
to assist in cleaning the water lines. For non-dispenser
models, discard the first two full bins of ice. For dispenser
models, dispense several glasses of water for a period of
two minutes.
If the water filtration system will not be used, it can be
placed in water filter bypass mode by removing the filter.
"Snooze/Refresh" appears on the control panel when the
filter needs to be replaced. Touch “Snooze” to delay the
reminder for 24 hours or until the filter can be replaced.
Replacement Sub-Zero water filters can be ordered online
at subzero.com/store. For questions, contact Sub-Zero
Customer Care at 800-222-7820.
Loading ...
Loading ...
Loading ...