Loading ...
Loading ...
Loading ...
Troubleshooting
Before You Call for Service If Service is Required
iiiiiiiiiiii_iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiii_iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiii_iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiii_iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiii_iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
If the unit appears to be malfunctioning,
..................................................................read through this manual first. Ifthe problem
persists, check the Troubleshooting Guide
below. Locatethe problem inthe guide and
referto the cause and its remedy before calling
for service.The problem may be something
verysimple that can be solved without a
service call.Consulting or contracting a
qualified service technician may be necessary.
Contact the dealer where you purchased
the unit if service is required. State the
model and serial number and explain the
problem. The model and serial number
plate is located on the ceiling of your unit.
Ifyou do not know the name of the selling dealer
or a localservice company, you can check
online at www.electroluxappliances.com or
call 1-.877-435-3287.
Unit not cold • Control set too warm. • Adjust temperature colder, Allow 24
enough, hours for temperature to stabilize.
Adjust • Light staying on. • Turn off manual light control.
temperatures See "Operation" section.
(see "Adjusting • Airflow to front grille • Airflow must not be
the Temperature" blocked, obstructed to front grille. See
inthe "Start-Up "Installation" section.
and Temperature
Control" section). • Door gasket not * Adjust door gasket.
sealing properly.
Unit too cold. * Control set too cold. *
Contents of unit
too cold/frozen.
Adjust temperatures
(see "Adjusting
the Temperature"
inthe "Start-Up
and Temperature
Control" section).
No interior light.
Adjust temperature warmer.
Allow 24 hours for temperature
to stabilize.
Power is not • Circuit breaker has • Verify electrical supply. See
restored after tripped. "Installation" section.
power failure.
Door does not • Door hinges are • Loosen hinges and re-align
close properly, misaligned, door. Retighten hinges.
Door gasket is not Turn gasket 180.
sealing properly.
Failed LED assembly. • Contact a qualified Electrolux
Service Technician.
Light will not go • Manual light control • Turn off manual light control.
out when door is is ON. See "Operation" section.
closed. • Door switch not • Check for proper door
making contact, alignment.
Alarm(s) will not • Door is ajar. • Press "Power" key to
shut off. acknowledge alarm.
Power has failed. • Ensure door is closed firmly.
Internal temperature is • Allow 24 hours for temperature
too high. to stabilize.
Loading ...