Vacmaster VJF607PF 1101 Operator’s Manual

Loading ...

MAINTENANCE

WARNING: ALWAYS DISCONNECT THE PLUG FROM THE POWER OUTLET BEFORE

REMOVING THE POWER HEAD FROM COLLECTION TANK.

IMPORTANT! Clean or change the lter regularly for best performance. ALWAYS USE THE

CARTRIDGE FILTER FOR DRY VACUUMING. If the machine is used without the cartridge lter,

the motor will burn out and the warranty will be voided. Always keep spare lters on hand.

NOTICE! The lters included are made of high quality materials designed to stop small dust

particles. The cartridge lter should be used for dry pick-up only. A dry cartridge lter is necessary

to pick up dust. If the cartridge lter is wet, it will clog quickly and be very difcult to clean. Handle

the lter carefully when removing it for cleaning and replacing it. Check the lters for tears or small

holes. A small hole can let dust pass through and out of the lter. Do not use a lter with holes or

tears; replace it immediately.

STORAGE

Before storing your vacuum, the collection tank should be emptied and cleaned. The accessories

should be cleaned and stored so they can be readily available when needed. Store the wet/dry

vacuum indoors.

REPAIRS

Repairs for this wet/dry vacuum should be performed only by qualied service personnel using

only identical replacement parts.

1. Verify that the power cord is disconnected from the outlet (Fig. 1).

2. Disconnect the hose from the vacuum (Fig. 2).

3. Undo the latches and remove the power head from the collection tank (Fig. 3). Place power

head on a soft, clean surface upside down.

4. Clear all dirt or debris from the collection tank and hose into a proper waste container (Fig. 4).

5. Clean or replace the lters.

6. Check the hose, attachments, and power cord to ensure that they have not been damaged.

7. Place the power head back onto the collection tank and secure latches.

6. Verify that the power switch is in the ‘O’ OFF position before plugging the power cord into the

outlet. Plug the power cord into the outlet (Fig. 4 & 5).

7. Before turning on the vacuum, rmly hold onto the loose end of the hose. Turn the motor on by

ipping the switch to the ‘I’ ON position (Fig. 6).

8. Once you have completed blowing, ip the power switch to the ‘O’ OFF position and unplug the

power cord from the outlet (Fig. 7).

EMPTYING THE COLLECTION TANK

Loading ...

Vacmaster VJF607PF 1101 Red Edition Portable Wet Dry Shop Vacuum 6 Gallon 3 Peak HP 1-1/2 inch Hose