Loading ...
Loading ...
Loading ...
CleaningVarious Parts or Your Appliance
Before cIeaning any part of the drawer, be sure control is turned OFF and the drawer is
COOL. REMOVE SPILLOVERS AND HEAVY SOILING AS SOON AS POSSIBLE. REGU-
LAR CLEANINGS WILL REDUCE THE NUMBER OF MAJOR CLEANINGS LATER.
Surfaces How to Clean
Plastic To remove control knob_ turn to the OFF position; grasp firmty and pull straight
Control Knobs off the shaft. Clean with a cloth soaked in soapy water. Rinse with a c_ean
water and a dishcloth. To replace knob after cleaning, line up the flat sides of
both the knob and the shaft: then push the knob into p_ace.
Note: Humidity controller knob can not be removed.
Stainless Steel Cleaners made especially for stainless steel are recommended. Always follow
Door & Drawer Body t_e mar_ufacturer's instructions. Be sure to rinse the cleaners. DO NOT clean
the door gasket. The door gasket is essentiaI for a good seal. Care should be
taken not to rub, damage or remove the gasket.
Porcelain Enamel
Body Parts and Cavity
Warmer Drawer Rack
Gentle scouring with a soapy scouring pad wilt remove most spots. Rinse with
a 1:1 solution of clear water and ammonia, ff necessao4 cover difficuIt spots
w_tnan ammonia-soaked paper towel for 30 to 40 minutes. Rinse with clean
water and a damp cloth, and then scrub with a soap-filled scouring pad. Rinse
and wipe dry with a clean cloth. Remove all cleaners orthe porcelain may
become damaged during [uture _eating. DO NOT use spray oven cleaners.
The rack may be removed for cleaning. If removed, clean by using a mild,
abrasive cleaner folIowing manufacturer's instructions.Rinse with clean water
and dry.
Loading ...
Loading ...
Loading ...