Loading ...
Loading ...
Loading ...
Supply needed to complete job
Do either of the following:
• Install the missing supply to complete the job.
• Cancel the current job.
The device is operating in Safe Mode. Some print options may be disabled
or provide unexpected results.
Tou ch Continue to clear the message.
Too many
flash
options installed [58]
1 Turn
o
the printer.
2 Unplug the power cord from the electrical outlet.
3 Remove the extra
flash
memory.
4 Connect the power cord to a properly grounded electrical outlet.
5 Turn the printer back on.
Too many trays attached [58]
1 Turn
o
the printer.
2 Unplug the power cord from the electrical outlet.
3 Remove the extra trays.
4 Connect the power cord to a properly grounded electrical outlet.
5 Turn the printer back on.
Unformatted
flash
detected [53]
Try one or more of the following:
• From the printer control panel, touch Continue to stop the defragmentation and continue printing.
• Format the flash memory.
Note: If the error message remains, then the flash memory may be defective and needs to be
replaced.
Unsupported disk
Remove the unsupported printer hard disk, and then insert a supported one.
Troubleshooting 266
Loading ...
Loading ...
Loading ...