Loading ...
Loading ...
Loading ...
10
ASSEMBLY INSTRUCTIONS
• Replace the battery or charger immediately if the battery case or charger cord is damaged.
• Always make sure the safety lock-out switch is OFF before inserting or removing the battery.
• Always make sure the battery is removed and the switch turned OFF before inspecting, adjusting,
or maintaining any other part of the edger.
• Read, understand, and follow the Battery Charger instructions.
WARNING
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not attempt to
assemble the product.
Estimated Assembly Time:
To avoid injury, adjust the auxiliary handle for optimum control and balance. Do not overreach when
operating grass edger. Keep proper balance at all times for better control of the tool in
unexpected situations.
WARNING
1. Front handle
a. Position the front/auxiliary handle (E) onto the
edger by sliding over
the tube (J).
c. The front handle can be adjusted to a suitable
position.
Note: Do not overtighten the fastening knob. It could
cause the fastening clamp to break.
b. Once the front handle is in the desired position,
align the hole on the handle with the hole on the
bracket (CC), then slide the bolt (BB) through the top
of the handle and secure with the fastening knob (AA).
Tighten until there is no movement in the handle.
1
Hardware Used
Fastening knob
x 1
AA
Bolt
x 1
BB
CC Bracket
x 1
BB
E
AA
J
CC
Loading ...
Loading ...
Loading ...