ECAM61075MB Instructions for Use

Loading ...

DISPLAYED MESSAGE POSSIBLE CAUSE REMEDY

Insert descaling spout The descaling spout (C7) is not correctly in

place or is missing.

Insert the spout and push as far as it will go

(g. 7). The appliance emits a beep (if the

beep function is enabled).

Insert milk container

The milk container (D) is not inserted

correctly.

Insert the milk container and push as far as it

will go (g. 23). The appliance emits a beep (if

the beep function is enabled).

If needed, ll milk container using

the rell lid

While preparing milk-based beverages, if

the milk in the container is not enough to

make the selected beverage, the appliance

recommends you top up the container (D)

without removing it.

Open the rell lid (D2) on the milk container

lid (D1) and pour in the milk without exceed-

ing the MAX level.

Cleaning underway The appliance has detected impurities in its

internal circuits.

Wait for the appliance to be ready again and

reselect the required beverage. Contact cus-

tomer services if the problem persists.

New settings not saved

While customising the beverages (see section

“14. Guided beverage customisation (My) u”),

preparation has been deliberately interrupt-

ed by pressing "Cancel" or an alarm has been

triggered.

Press "OK" to go back to the homepage (B) to view

the alarm causing the interruption. Follow the

instructions corresponding to the alarm displayed

(see section “21. Displayed messages u”)

→

Loading ...

Instructions for Use - Page 25