Loading ...
Loading ...
Loading ...
en PowerBoost function
14
vPowerBoost function
Power Boost f unc t i on
The PowerBoost function enables you to heat up large
quantities of water faster than when using heat setting
Š.
This function can be activated for a hotplate, provided
the other hotplate in the same group is not in use.
Otherwise, › and Š flash in the display for the selected
hotplate. The heat setting Š is then set automatically
without activating the function.
Activating
1. Select a hotplate.
2. Touch the à symbol.
The
›Ú indicator lights up.
The function has now been activated.
Deactivating
1. Select the hotplate.
2. Touch the à symbol.
The ›Ú indicator goes out and the hotplate switches
back to the Š heat setting.
The function is deactivated.
Note: In certain circumstances, the PowerBoost
function can switch itself off automatically in order to
protect the electronic elements inside the hob.
AChildproof lock
Chi l dpr oof l ock
You can use the childproof lock to prevent children
from switching on the hob.
Activating and deactivating the childproof
lock
The hob must be switched off.
To activate: Touch the
0 symbol for approx. four
seconds. The D symbol lights up for 10 seconds. The
hob is locked.
To deactivate: Touch the 0 symbol for approx. four
seconds. The lock is released.
Childproof lock
With this function, the childproof lock automatically
activates when a hob is switched off.
Switching on and off
You can find out how to switch the automatic childproof
lock on in the ~ "Basic settings" section
bAutomatic safety cut-out
Aut omat i c saf et y cut - out
If a hotplate operates for an extended period and no
settings are changed, the automatic safety shut-off is
activated.
The hotplate stops heating. ”, ‰ and the residual heat
indicator œ or • flash alternately in the hotplate display.
When you touch any symbol, the display switches off.
The hotplate can now be set again.
The point at which the safety shut-off becomes active
depends on which heat setting has been set (after 1 to
10 hours).
Basic settings en
15
QBasic settings
Ba s i c s et t i ngs
The appliance has various basic settings. These basic
settings can be altered to suit your individual
requirements.
Indicator/
symbol
Function
™‚
Childproof lock
‹ Manual*.
‚ Automatic.
ƒ Function deactivated.
™ƒ
Signal tones
‹ Confirmation and fault signals are switched off.
‚ Only the fault signal is switched on.
ƒ Only the confirmation signal is switched on.
„ All signal tones are switched on.*
™„
Display energy consumption
‹ Deactivated.*
‚ Activated.
™†
Automatically programming the cooking time
‹‹ Switched off.*
‹‚-ŠŠ Time until automatic switch-off.
™‡
Audible signal duration for the timer function
‚ 10 seconds.*
ƒ 30 seconds.
„ 1 minute.
™ˆ
Power management function. Limiting the total power of the hob
The available settings depend on the maximum power of the hob.
‹ Deactivated. Maximum power of the hob. */**
‚ 1000 W minimum power.
‚. 1500 W
...
„ 3000 W recommended for 13 A.
„. 3500 W recommended for 16 A.
… 4000 W
…. 4500 W recommended for 20 A.
...
Š or Š. Maximum power of the hob.**
™Š
Time for selecting the cooking zone
‹ Unlimited: The hotplate that was last set remains selected.*
‚ Limited: The cooking zone only remains selected for a few seconds.
™‚ƒ
Check the cookware and the cooking results
‹ Not suitable
‚ Not perfect
ƒ Suitable
Loading ...
Loading ...
Loading ...